The reliable solution for a secure connection between non-precious metal framework and veneering ceramic
Use non-precious metal bonders? The compressive strength of dental ceramics exceeds its tensile strength many times over. Denseo OxyBond ensures a secure bond between the non-precious metal framework and the ceramic veneer. Oxide and wash firing are eliminated. Ideally, only one opaque firing is required. This saves you considerable materials and time during Blending.
Denseo OxyBond compensates for possible differences in the CTE and thus prevents cracks and chipping. The scattering crystals ensure the ideal gearing. Costly corrections and new productions can thus be avoided.
This product ensures a secure bond between the non-precious metal framework and the ceramic veneer, eliminating the need for oxide and wash firing. Denseo OxyBond for non-precious metal frameworks is the ideal solution, ideally requiring only one opaque firing, which means significant savings in materials and time during veneering.
Start at 600°C
Pre-drying for 2 min.
Heating rate: 80°C/min.
Final temperature: 980°C
Hold time: 30 seconds
Vacuum on at 600°C
Vacuum off at 980°C
Important: The firing temperatures specified are guidelines only. Deviations due to different kiln capacities are possible and may need to be adjusted if necessary.
| UTS0523 | Denseo OxyBond 25g |